HP JL258A ARUBA 2930F 8G POE+ 2SFP+ SWITCH

Product Information

The 2930F 8G PoE+ 2SFP+ Supports up to 125W of internal PoE+ power for wireless access points, cameras and phones. X132 10G SFP+ LC LR Transceiver - Small Form-factor Pluggable Plus (SFP+) 10-Gigabit LR standard, providing 10-Gigabit connectivity up to 10km (6.21 miles) on single-mode fiber - Has one LC 10-GbE port - For use with the 10GbE SFP+ port module ONLY Only the J8177D is supported (J8177C not supported). J8177D or JL747A can only operate at 1G in the 10000 series.

X121 1Gb SFP LC LH Transceiver - Small form-factor pluggable (SFP) Gigabit LH transceiver that provides a full-duplex Gigabit solution up to 70km (43.5 miles) on single-mode fiber - Has 1 LC 1000BASE-LH port

Aruba 2930F 8G PoE+ 2SFP+ Switch

K.12.01 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007 X121 1Gb SFP LX Transceiver - Small Form-factor Pluggable (SFP) Gigabit LX transceiver that provides a full-duplex Gigabit solution up to 10km (6.21 miles) on single-mode or 550m (1804ft) on multimode fiber - Has one LC 1000BASE-LX port X122 1Gb SFP LC BX-D Transceiver - Small Form-factor Pluggable (SFP) Gigabit BX (bi-directional) 'downstream' transceiver that provides a full-duplex Gigabit solution up to 10km (6.21 miles) on one single-mode fiber - Has one LC 1000BASE-BX10 port

The v2 32Y4C models support MACsec on ports 1-4 only at 10G/25G speeds (50G speed NOT available for ports 2 and 4) Selectable queue configurations allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications Multimode OM3 LC/LC Fiber Optic cable, 1.0m (3.28ft) long - Duplex zipcord graded index 50/125um multimode fiber optic cable with LC connectors on each end (Aqua Color) - Optical performance: 2000MHz/km For use in the SFP ports of the 2530 Series Switches. (The J9853A, J9854A, J9855A, and J9856A models have 1G/10G SFP⁠+ ports that do not support these 100Mbps transceiver modules.)

The 8325 requires configuration of interface groups (groups of 12 ports) to enable the use of 1G or 10G transceivers / DACs in the SFP28 ports (Interface Groups default to 25G speed). Table 57: Compatibility for SFP copper transceiver modules. The specifications for Revision D transceiver products are the same as the specified Revision A, B, and C SKUs. Not supported for use in the following 3800 models: J9573A, J9574A, J9575A, and J9576A. The SFP⁠+ ports do not support 100M operation.

Aruba 2930F 8-port Power Supply Shelf - Mounts to the rear of the switch and provides a shelf for attaching the external power adapter

Features and Benefits:

Multimode OM3 LC/LC Fiber Optic cable, 50m (164ft) long - Duplex zipcord graded index 50/125um multimode fiber optic cable with LC connectors on each end (Aqua Color) - Optical performance: 2000MHz/km X111 100Mb SFP LC FX Transceiver - Small Form-factor Pluggable (SFP) FX transceiver that provides up to 2km (1.24 miles) full duplex or 412m (1352ft) half duplex - Has one LC 100BASE-FX port VxLAN encapsulation (tunneling) protocol for overlay network that enables a more scalable virtual network deployment CAT 5e cable RJ45 to RJ45 7.6m (25ft) - Up to 1 Gigabit operation, Ethernet cable with (M) RJ45 connectors on each end

J8177C/J8177D will have a delay (~15 secs) before link up or down is properly displayed when a cable is inserted or removed. Dual Core ARM Coretex @ 1016 MHz (48G models) or Dual Core ARM Coretex A9 @ 1016 MHz (8G/24G models) The 25G module (JL687A) requires configuration of "interface groups" (groups of 4 ports) to enable use of 1G or 10G transceivers or DACs in the SFP28 ports (default is to use 25G transceivers / DACs). speed is NOT supported for the J8177D or JL747A when used in any port (SFP+, SFP28, or SFP56) on the 6400 series.

Cookies on BT Business Direct

For J8705A and J8706A modules: K.12.01 (for J9054B/C 1990-3613); K.15.08.0007 (for J9054C 1990-4112 and 1990-4483) J9054D: K.15.08.0007